PRODUCTS Flowmeter valve-balance valve HP-BLV01
Product Category
Select Product Category
  • Detail
  • Description: 

    The balancing valve is an hydraulic device that accurately regulates the flow rate of heating medium supplied to system terminals. A correct balancing of hydraulic systems is essential to guarantee the system operation according to its design specifications, high thermal contort and low energy consumption. This particular series of valves is equipped with a flow meter for a direct reading of the regulated flow rate. The flow meter, housed in a by-pass circuit on the valve body and that can be shut off during normal functioning, allows a fast and easy balancing of circuits without the need for differential pressure gauges or diagrams. The balancing valve is equipped with a hot pre-formed shell insulation to ensure a perfect thermal performance in case of use both with hot and chilled water.

    Material: brass CW617N

    Technical data:

    Medium: water, glycol solutions

    Max. percentage of glycol: 50%

    Max. working pressure: 10 bar

    Working temperature range: -10-110°C

    Flow rate range unit of measurement: l/min

    Accuracy: ±10%

    Control stem angle of rotation: 90°

    Operating wrench:

    1/2-1 1/4: 9mm

    1 1/2-- 2:  12 mm

    size

    1/2″

    3/4″

    3/4″

    1″

    1 1/4″

    1 1/2

    2″

    flow rate rang (l/min)

    2-7

    5-13

    7-28

    10-40

    20-70

    30-120

    50-200

SERVICE
SERVICE